Steering Wheel

This forum is for non members to ask questions to the ATDC Members. Members should use the private forums for any and all Member to Member conversations.
Post Reply
BrianEvans
Posts: 36
Joined: Wed Dec 28, 2022 10:27 pm

Steering Wheel

Post by BrianEvans » Sat Jun 01, 2024 1:44 pm

Hi there anyone got a mint condition steering wheel for an Austin 10 Cambridge 1937 and also running board rubbers with the Austin logo for a 1937 Austin New Ascot that they would like to sell ?
Brian & Jo

User avatar
peter_winney
Posts: 1750
Joined: Wed Nov 20, 2019 3:31 pm
Location: BATH

Re: Steering Wheel

Post by peter_winney » Sat Jun 01, 2024 2:43 pm

For steering wheel restoration try https://www.steeringwheelrestoration.com/

The New Ascot running boards rubbers do not have an Austin logo.
Member since July 1972
Never too old to learn something new

BrianEvans
Posts: 36
Joined: Wed Dec 28, 2022 10:27 pm

Re: Steering Wheel

Post by BrianEvans » Sat Jun 01, 2024 2:52 pm

Thank you Peter, have seen their site and will give them a call .I’m still wrestling with this ludicrous forum and trying to post pictures , it’s enough to drive you mad !!!!

User avatar
peter_winney
Posts: 1750
Joined: Wed Nov 20, 2019 3:31 pm
Location: BATH

Re: Steering Wheel

Post by peter_winney » Sat Jun 01, 2024 3:03 pm

Yes, it would be good to have more pics on here.

The New Ascot running board rubbers look like those on the Cambridge - only longer and probably wider. Not sure that anyone ever made replicas either in rubber or fibreglass like they did for the 10s.
Member since July 1972
Never too old to learn something new

6350_William_French
Posts: 149
Joined: Wed Nov 20, 2019 10:27 am

Re: Steering Wheel

Post by 6350_William_French » Sun Jun 02, 2024 3:50 pm

Hi Brian

Yes posting a picture is a fine art on this forum, but once you have mastered it it is fairly straight forward.
There is a section on how to post pictures so I wont repeat it here, BUT the picture must be less than about 80 kilobyres or it wont post.
I am not sure what the exact figure is but I just keep reducing the size until it works.
And I think you have to be logged in the the members section, not the public section to post pictures. Someone will correct me if I am wrong!

Bill French

BrianEvans
Posts: 36
Joined: Wed Dec 28, 2022 10:27 pm

Re: Steering Wheel

Post by BrianEvans » Thu Jun 13, 2024 11:10 am

I never know if I’m in the members section or the public section,what is the difference ? 🙄

Ivor Hawkins
Posts: 257
Joined: Mon Apr 05, 2021 1:50 pm
Location: Evenley, Northants

Re: Steering Wheel

Post by Ivor Hawkins » Thu Jun 13, 2024 2:06 pm

You are posting in the public section Brian, the club section is quite extensive and you may have to access it through the main ATDC website under members area but for some reason you have to set up a separate user name and password and in my case I have to log in every time I visit, hopefully you may be luckier than I am!

User avatar
peter_winney
Posts: 1750
Joined: Wed Nov 20, 2019 3:31 pm
Location: BATH

Re: Steering Wheel

Post by peter_winney » Thu Jun 13, 2024 4:55 pm

BrianEvans wrote:
Thu Jun 13, 2024 11:10 am
I never know if I’m in the members section or the public section,what is the difference ? 🙄
You should get a page that looks like this:

forum-view.jpg
forum-view.jpg (254.76 KiB) Viewed 847 times
Member since July 1972
Never too old to learn something new

Post Reply