Leaf springs

This forum is for non members to ask questions to the ATDC Members. Members should use the private forums for any and all Member to Member conversations.
Post Reply
Posts: 14
Joined: Thu Jun 02, 2022 6:30 pm

Leaf springs

Post by Petetherod » Sun Jun 19, 2022 3:48 pm

Hi. I think I need to get my leaf springs refurbished or replaced on my 1933 10/4. Can anyone suggest a suitable supplier? Thanks Pete

Posts: 3
Joined: Sat Mar 27, 2021 1:12 pm

Re: Leaf springs

Post by gyto1 » Wed Jul 06, 2022 9:44 pm

Think I might need mine done also, any suggestions for a company to do the job? thanks

Posts: 139
Joined: Mon Nov 25, 2019 10:22 am
Location: Marlow, Buckinghamshire

Re: Leaf springs

Post by richard_mallet » Thu Jul 07, 2022 8:54 am

I haven't used them but I understand these people are very competent, might be worth contacting them.


Posts: 1
Joined: Fri Aug 05, 2022 3:24 pm

Re: Leaf springs

Post by NeilMarshall » Fri Aug 05, 2022 3:32 pm

Has anyone tried dismantling their springs, wire brushing, then turning each leaf upside down?

Posts: 518
Joined: Wed Nov 20, 2019 3:46 pm
Location: Newton Mearns, Glasgow

Re: Leaf springs

Post by peter_christie » Sat Aug 06, 2022 3:43 pm

Hi Neil,
I have certainly dismantled and wire brushed leaf springs, but always reassembled them the way they came off. I think it would be counter productive to reverse the leaves as they are manufactured with a natural camber. In any case, the main leaf has curled bush housings at each end so there's only one logical way to rebuild the spring.
Peter C. [6515]

Post Reply