Andre Hartford Shock Absorbers

This forum is for non members to ask questions to the ATDC Members. Members should use the private forums for any and all Member to Member conversations.
Post Reply
Jasper
Posts: 65
Joined: Wed Jul 21, 2021 9:30 am
Location: Hailsham East Sussex

Andre Hartford Shock Absorbers

Post by Jasper » Tue Jul 05, 2022 7:15 am

This will probably seem like a silly question!!

I need to refurbish the above front and back. I take it I can just unbolt them without any jacking up...Is there any need to put anything under the springs to remove the shocks?
Regards

User avatar
peter_winney
Posts: 1576
Joined: Wed Nov 20, 2019 3:31 pm
Location: BATH

Re: Andre Hartford Shock Absorbers

Post by peter_winney » Tue Jul 05, 2022 4:06 pm

It is not essential to jack the axle or car to remove the shocks, but it may be handy to have more room to work by using ramps or axle stands (assuming you do not have a pit or hoist)
Member since July 1972
Never too old to learn something new

Jasper
Posts: 65
Joined: Wed Jul 21, 2021 9:30 am
Location: Hailsham East Sussex

Re: Andre Hartford Shock Absorbers

Post by Jasper » Tue Jul 05, 2022 4:39 pm

No pit, no hoist and thank you so much

Regards

Post Reply