Austin Ten Drivers Club

I'm enquiring to see if you have sold the engine or if it's still available.. If you still have it or know of any available could you contact me on 07752120069 or allan4846@sky.com

Kind regards
Allan Curtis

Thank for the advice I hope to be able to do the work in the next couple of days
Regards
Allan

Thanks for your reply I will make some enquires about any local engineering company to have one made.I have never removed valve guides before and am a bit worried about damaging the engine b lock so I will be very careful and rush anything
Regards
Allan

Thanks for your reply
I have a service manual that said to drift the guides out with a suitable punch this will be my first time to this procedure.what tool do you suggest I use.I am in South wales
Regards
Allan

Wanted a valve guide punch to remove the valve guides on my 1946 Austin Ten gs1
Allan Curtis 07752120069 Allan 4846@sky.com

I didn't find a gearbox at the beaulieu autojumble.I bought a New old stock goldseal gearbox from a club member what a difference it made to the driving experience.it is different car

Wanted a voltage regulator Lucas RB91 to fit an Austin Ten GS1 1946 07752120069 allan4846@sky.com

Hi Bill
Thanks for the reply.I will be using the old studs and nuts so I shall use a spanner and be very careful
Regards
Allan

What would be the correct torque setting for these nuts allan4846@sky.com 07752120069
I have been told to tighten with a spanner by feel which only comes with experience

Wanted the thin bendix return spring to suit the starter motor M 418 G
Allan4846@sky.com 07752120069