Search found 100 matches
- Tue Nov 16, 2021 11:02 pm
- Forum: Public Requests For Club Assistance
- Topic: Spring Shackles & Bushes - greased or silentbloc
- Replies: 16
- Views: 21387
Re: Grease nipple thread type
I'm keeping this in mind for the future. I was under the Goodwood the other day doing a quick 1/2 yearly look-over/grease (pre-WOF inspection) and also noted play in my spring eye bushes. The inspector didn't, he was busy admiring the wooden spacers a PO had put in the running board mountings. The c...
- Sun Oct 31, 2021 10:03 pm
- Forum: Public Requests For Club Assistance
- Topic: Spring Shackles & Bushes - greased or silentbloc
- Replies: 16
- Views: 21387
Re: Grease nipple thread type
Chiming in late Gary, leaf spring makers (like Bellamy & East or Archers') from past experience appear to have access to a variety of ready-made eye bushes of the rubber top hat/solid metal/silentbloc type which might save you some lathe time. Also worth leafing through the Nolathane catalogue for s...
- Fri Oct 29, 2021 5:43 am
- Forum: Public Requests For Club Assistance
- Topic: Spring Shackles & Bushes - greased or silentbloc
- Replies: 16
- Views: 21387
Re: Grease nipple thread type
If I were in your shoes Gary, I would be very tempted to ditch the threaded technology, unless you're a stickler for originality, and either look at rubber bushings (either bonded into a steel sleeve like the OE silentbloc or two piece top hat ones like more modern cars) and fabricated plain pins. E...
- Thu Oct 28, 2021 4:50 am
- Forum: Public Requests For Club Assistance
- Topic: Grease nipple thread type
- Replies: 9
- Views: 13866
Re: Grease nipple thread type
Peter C./Peter W. yes, Austin publication 1785 (FRA Goodwood 'List of Spare parts') has a page headed "Springs With Screw type Shackle Pins for Overseas" . I don't believe I have ever seen any UK import (of any make) of this era with anything but screw type shackle pins. Not sure why the Empire miss...
- Thu Oct 07, 2021 7:28 am
- Forum: Public Requests For Club Assistance
- Topic: 12v 0r 6v
- Replies: 8
- Views: 12357
Re: 12v 0r 6v
Try the starter motor first, *if its like the later 1930s units*, the Lucas trademark, the Lucas part number number, voltage and direction of rotation ( the last also important if you have a collection of parts which may or may not belong together) are stamped in the housing on the mounting flange s...
- Sun Oct 03, 2021 6:38 am
- Forum: Public Requests For Club Assistance
- Topic: Book
- Replies: 11
- Views: 17737
Re: Book
Hey Daren, lots of questions (not surprising if you have a basket case). Don't know what part of the world you are in, but my two cents worth would be: a) join the Austin Ten drivers Club which gives you more opportunities to ask questions and (get the specific answers you're looking for) on the mem...
- Thu Sep 16, 2021 8:17 am
- Forum: Public Requests For Club Assistance
- Topic: Air Filter 10/4
- Replies: 5
- Views: 9938
Re: Air Filter 10/4
Looking back, seemingly all mass produced UK makes of the era only ever fitted air cleaners to 'Export' models (?). Ditto 4-blade cooling fans and oversized radiators, almost as if 'Export' was short hand for 'desert'. I guess they were hedging their bets. Although a lot of US models from the 20s an...
- Sun Aug 29, 2021 11:35 pm
- Forum: Public Requests For Club Assistance
- Topic: Clutch adjustment
- Replies: 5
- Views: 8465
Re: Clutch adjustment
When you say "it doesn't seem to work at all now" do you mean it won't declutch as in the pedal depresses but the clutch wont release? If this is the case I would suspect the clutch plate is sticking on one or both of the lined plates (I think this model has the plain center plate clutch?) or if the...
- Sat Aug 28, 2021 11:51 pm
- Forum: Public Requests For Club Assistance
- Topic: Radiator "steam valves"
- Replies: 5
- Views: 7606
Re: Radiator "steam valves"
Peter: FRA series Goodwood (sorry, should've said in the original post). The radiator overflow pipe terminates at a banjo fitting on the top radiator tank close to the filler cap instead of being terminated as a standpipe inside the top tank. If you remove the banjo securing screw there's a spherica...
- Sat Aug 28, 2021 2:59 am
- Forum: Public Requests For Club Assistance
- Topic: Radiator "steam valves"
- Replies: 5
- Views: 7606
Radiator "steam valves"
Just enquiring as to whether any members have seen a functional one of these things which seem to have been part of the equipment on later model radiators? They look a lot like a ball check valve (possibly using a brass ball), judging by what's left on my car, but was the ball originally lightly spr...