Austin Ten-Four 1933 – Looking for G4002 complete brake shoes

This forum is for non members to ask questions to the ATDC Members. Members should use the private forums for any and all Member to Member conversations.
Post Reply
claudio
Posts: 2
Joined: Tue Jun 23, 2026 8:41 am

Austin Ten-Four 1933 – Looking for G4002 complete brake shoes

Post by claudio » Tue Jun 23, 2026 8:46 am

Hello,

I own an Austin Ten-Four (Austin 10/4) from 1933 and I need some help finding replacement brake shoes.

My original brake shoes are damaged. The problem is not the brake lining material – the actual alloy/aluminium brake shoe body is broken and unfortunately it cannot be welded due to the type of old alloy material.

I am looking for a complete set of 4 brake shoes.

Details of my original parts:

Vehicle: Austin Ten-Four (Austin 10/4)
Year: 1933
Original brake shoe marking: G4002
Brake shoe width: approximately 1 1/4" (32 mm)
Straight length end to end: approximately 8" (200 mm)
Curved outside length: approximately 8.8" (225 mm)
Brake drum diameter: approximately 8.8" (225 mm)

I have attached photos of:

the original brake shoes
measurements
brake drum

Could anyone please help me identify these brake shoes or know where I can find replacements (new old stock, used, or reproduction)?

Maybe these G4002 brake shoes were also used on other Austin models.

Any help would be greatly appreciated.

Thank you very much.

Best regards,
Cláudio
Portugal

6350_William_French
Posts: 212
Joined: Wed Nov 20, 2019 10:27 am

Re: Austin Ten-Four 1933 – Looking for G4002 complete brake shoes

Post by 6350_William_French » Tue Jun 23, 2026 5:53 pm

Hi

Austins of Old Arley will have the brake shoes you need. Check out their website and get incontact with Theo.

Bill French

claudio
Posts: 2
Joined: Tue Jun 23, 2026 8:41 am

Re: Austin Ten-Four 1933 – Looking for G4002 complete brake shoes

Post by claudio » Tue Jun 23, 2026 7:36 pm

Hi Bill

Thank you very much for your reply
I sent an email to this address sales@austinsofoldarley.co.uk at 12 noon but haven’t received a reply. The email I sent was from this address: claudiomoliveira.sgs@gmail.com

I sent photos and everything about the parts; I can’t see these parts on the website

Thank you. I’ll wait for a reply to the email
Claudio

Post Reply